Jetta GLX V6-2.8L (AFP) (2002)
1. Selector lever handle
-
Press sleeve -item 2- down and pull handle off upward.
2. Sleeve
-
Locates in the selector lever handle
-
Prevents selector lever handle from being pulled off
3. Cover
-
With selector indicator
-
Clipped into frame -item 7-
4. Cover strip
-
Insert in frame -item 7-
5. Selector lever position display
-
Printed circuit for selector lever position display (illumination) is held in position by clips
-
Contacts for selector lever position face to selector lever contact springs -item 27-
-
Secure connector with retainer -item 6- to frame -item 7-
-
Insert fibre optic light guide and wiring to connector housing in the mountings on frame
-
Connecting and disconnecting connector
6. Retainer
-
Clip push in housing into frame -item 7-
7. Frame
-
Carefully pry off in corners
-
Push in cover strip -item 4-
-
Note position of printed circuits and wiring -item 5-
-
When installing do not damage contact springs -item 27- for selector lever position display
8. Bolt, 7 Nm
-
For locating spring -item- 12 and plate -item 11- to frame
9. Shim