Jetta GLX V6-2.8L (AFP) (2002)
Separate master cylinder operating rod from clutch pedal as follows:
-
Insert release tool 3309 in clutch pedal cutouts (arrow A). Inscription "top/open" (B) points away from clutch pedal.
-
With pliers 10-208A positioned in recesses (arrow C), press release tool together.
-
Turn stop -A- for clutch pedal in direction of arrow and remove.
-
Push slave cylinder in direction of arrow -1- onto stop.
Slave cylinder must not be covered in upper area by over-center spring mounting (arrow 2).
-
Swing slave cylinder in direction of arrow 3 out of mounting bracket.
Installing
Installation is carried out in the reverse sequence, when doing this note the following: