Jetta GLX V6-2.8L (AFP) (2002)
-
Remove nut -A-.
-
Pull bolt out and remove clutch pedal.
Installing
Installation is carried out in the reverse sequence, when doing this note the following:
-
Install over-center spring.
-
Fit retainer -A- to master cylinder operating rod -B-.
-
Press clutch pedal in direction of arrow to engage. Ensure correct location.
-
Fill brake fluid reservoir up to "max" marking with brake fluid.
Bleeding clutch system when fluid level is below "min" marking.
Over-Center Spring, Removing and Installing
5 Speed Manual 02J
Over-Center Spring, Removing And Installing
Special Tools
-
3317 Installation clamp