Jetta GLX V6-2.8L (AFP) (2002)
/Page-1222014.png)
Fig. 25 Pulling tapered roller bearing outer race out from transmission housing
A - Counter support, e. g. Kukko 22/2
B - Internal puller 46 to 58 mm, e.g. Kukko 21/7
Fig. 26 Pressing tapered roller bearing outer race into transmission housing
^
Install shim under outer race.
^
Support transmission housing with press piece 2050 directly below bearing support.
Output Shaft For 5TH, 6TH and Reverse Gear, Dis/Assembling
Output shaft for 5th, 6th and reverse gear, disassembling and assembling
Special tools and equipment
