Jetta GLX V6-2.8L (AFP) (2002)
Fig. 2 Pressing tapered roller bearing outer race into transmission housing
^
Install washer under outer race.
^
Support transmission housing with press tool 40-20 directly below bearing mounting.
Fig. 3 Pulling off tapered roller bearing inner race
^
Before mounting extractor, position press piece VW 431 and thrust plate 40-105 on output shaft.
^
First remove securing clip.
Fig. 4 Pressing off 5th and 6th gear synchro-hub/locking collar with 6th gear
^
First remove securing clip.
Fig. 5 Pressing off 5th gear synchro-hub/locking collar with spacer sleeve
^
First remove securing clip.