Jetta GLX V6-2.8L (AFP) (2002)
/Page-1222024.png)
Fig. 13 Disassembling and assembling 5th and 6th gear locking collar and synchro-hub
1 - Spring
2 - Locking piece
3 - Locking collar
4 - Synchro-hub
^
Slide locking collar over synchro-hub.
The recesses for locking pieces in synchro-hub and locking collar must align.
Fig. 14 Assembling 5th and 6th gear locking collar/synchro-hub
The locking collar has been pushed over the synchro-hub.
^
Insert locking pieces and install springs 120- offset. Angled end of spring must locate in hollow locking piece.
Fig. 15 Pressing on 5th and 6th gear locking collar/synchro-hub
^
Install securing clip.
