Jetta GLX V6-2.8L (AFP) (2002)
Installing carrier assembly
-
Pull operating lever -1- in direction of arrow.
-
Tension spring -2- which is secured on door lock in direction of arrow with a screwdriver and hook spring into locking lever.
NOTE: Hooking the operating lever in locks the lock and prevents incorrectly attaching the bowden cable later.
-
Guide electrical wiring through boot into door and secure clips in door panel.
-
Install carrier assembly in door.
-
Insert all bolts and tighten bolts marked -1- and -2- in sequence. Tightening torque: 8 Nm (71 in. lb).
NOTE: The remaining bolts can be tightened in any sequence.
-
Remove window guide in reverse order, install center frame and door window and connect door window with window regulator.
Remaining installation is in reverse order of removal.
-
Check function of door components.