volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Customer Interest for Control Module: > < A/T - Slips On 2-3 Upshift|Page 567
Page 1
background image

Control Module: All Technical Service Bulletins
A/T - AG4 Slips on 2nd to 3rd Gear Shifts

Group: 37

Number: 03-01

Date: July 23, 2003

Models: 
ALL with 2.8L VR6 (Eng. Code AFP)

1999-->

2002

Subject: 
Automatic Transmission, Slips When Shifting from 2nd to 3rd Gear 

Condition

Transmission slips and then shifts hard into gear during the 2nd to 3rd shift.

May be caused by Transmission Control Module (TCM) software.

Service

If transmission diagnosis does not indicate repairs are necessary:

-

Install new TCM Part No: 01M 927 733 MP, (software level 5060).

-

The "MP" suffix part supersedes Part No: 01M 927 733 with suffix-DJ, JS, KR, MB and MH.

CAUTION!

Part numbers are for reference only.

Always check with your Parts Dept. for the latest parts information.

After TCM replacement, using the VAS 5051 or VAS 5052:

-

Check and erase Diagnostic Trouble Codes (DTCs).

-

Set Basic settings.

Customer Interest for Control Module: > < A/T - Slips On 2-3 Upshift|Page 567