Jetta Sedan L4-1.8L Turbo (AWP) (2003)
ASR/ESP switch removal is described below:
NOTE: Switches cannot be removed using a screwdriver due to the strong springs in their engagement mechanisms.
Removing
-
First remove driver's side heated seat control module/regulator.
-
Reach behind the ESP switch using the tip of assembly tool T10034.
-
Release the button for ESP -1- using assembly tool T10034 and remove from vent.
-
Disengage and disconnect electrical harness connectors.
-
Remove emergency flasher switch -2- and switch for heated rear window -3- in the same manner if necessary.
Installing
-
Connect and engage all electrical harness connectors.
-
Insert switches into vent and engage.