Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
Prerequisites:
-
Heating and ventilation controls are installed.
-
Connecting duct removed.
Adjusting
-
Turn temperature rotary control knob to left onto stop.
-
Attach center wire of cable -1- to the temperature flap lever -2-.
-
Push temperature flap lever -2- to stop -arrow A- and secure outer cable -1- with clip -3-.
-
Turn temperature rotary control knob to left and right onto stops.
-
When turning the rotary control knob, both end stops must be reached.
Fig. 2 Footwell/defroster flap cable, installing and adjusting
Prerequisite:
-
Heating and ventilation controls are installed.
Adjusting
-
Turn air distribution rotary knob to left to stop.
-
Attach wire end of cable -1- to temperature flap lever -3-, arrow -A-.
-
Push footwell/defroster flap lever to stop -arrow C- and attach outer cable -1- with clip -2-, -arrow B-.
-
Turn air distribution rotary control knob to left and right to stops.
-
When turning the rotary control knob, both end stops must be reached.
Fig. 3 Central flap cable, installing and adjusting
Prerequisites: