Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
/Page-3567003.png)
-
Release spring sealing cover -arrow- and remove.
-
Disconnect electrical connector -1- from bulb.
-
Push retaining clip -2- over lugs -3- and release.
-
Pull bulb -4- out of reflector.
Installing
CAUTION: Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates
on the bulb during operation can cause the glass to cloud over.
-
Insert new bulb so lugs on bulb plate align with cut-outs in reflector.
-
Connect electrical connector -1-.
-
Install sealing cover.
-
Check fog light (bulb) function.
