Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
/Page-2409003.png)
-
Remove intake hose - A-.
Removing intake line
We recommend that the flexible pliers from tool set VAS 5024 be used to remove the intake line lower spring-type clip.
-
Disconnect all electrical cables and hoses.
-
Open spring-type clamps - 1 - with flexible pliers.
-
Remove intake line - B -.
-
Clamp off intake hose with hose clamps 3094.
-
Open spring clamp - 3 - and remove intake hose
Use assembly tool for spring-type clip pliers VAS 5024 for this.
