Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
/Page-2513004.png)
1 - Drive axle
^
For special model "Golf GTI 132 kW"
^
Pulling drive axle out from wheel hub and pressing in []
2 - Drive axle
^
Pulling drive axle out from wheel hub and pressing in []
3 - Speed sensor
4 - Hex socket head bolt, 10 Nm
5 - Suspension strut
6 - Hex bolt
^
Always replace
^
The point on hex bolt must point in normal direction of travel
7 - Tie rod end
8 - Self-locking nut
^
60 Nm plus an additional 1/4 turn (90°)
^
Never less than 90°!
^
Turning angle tolerance 90° to 120°
^
Always replace
9 - Self-locking hex nut, 45 Nm
^
Always replace
10 - Wheel bearing housing
For vehicles:
^
With gasoline engines up to and including 92 kW
^
With SDI/TDI engine
11 - Ball joint
^
Checking go to Ball joint, checking
