Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
/Page-1751002.png)
^
Carefully pry off in the corners
^
Push in cover strip item -4-
^
Pay attention to position of printed circuits and wiring item -5-
^
When installing do not damage contact springs item -27- for selector lever display
8 - Bolt
^
7 Nm
^
Locating spring item -12- and plate item -11- to frame
9 - Shim
10 - Locking segment
^
Place on centralizing elements of selector lever housing item -16-
11 - Plate
12 - Locating spring with roller
^
Locates in the detent in selector lever item -13-
13 - Selector lever
^
With pull rod, spring, detent, contact spring for selector lever position and releasing locking cable
14 - Roller
^
For releasing locking cable
15 - Circlip
16 - Selector lever housing
^
Need not be removed to replace majority of individual parts, with exception of selector lever and shift lock solenoid
17 - Fulcrum pin
^
Splined
^
Grease shank
^
Do not turn when installing selector lever
18 - Bolt
^
25 Nm
19 - Locking lever
^
For locking cable
^
For locking in selector lever position "P"
20 - Shim
21 - Bolt
22 -Gasket
^
Always replace
23 - Cover
^
For selector lever housing
24 - Bolt
^
Qty. 14
25 - O-ring
^
Always replace
26 - Bolt
^
8 Nm
^
Qty. 2
27 - Contact spring
^
For selector lever display
28 - Bolt
^
4 Nm
^
Place selector lever in "P" to loosen and tighten
29 - Clip
30 - Steering lock