Jetta Sedan L4-2.0L (BBW) (2005)
CD Changer: Service and Repair
CD Changer, Removing and Installing
CD Changer, Removing And Installing
Removal and installation described here is essentially the same for both Golf and Jetta models.
NOTE:
When installing a new CD Changer in vehicle not previously equipped with one:
-
Prior to installation, CD Changer position (vertical or horizontal) must be set via the V/H switches. Check and reset if necessary.
-
Radio must be coded in order to support CD Changer functions. After installing new CD unit, input appropriate radio coding using On Board
Diagnostic program function 07, "Code Control Module".
Removing
CAUTION:
Before beginning repairs on the electrical system:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Turn release knobs in direction of arrow and open trim flap.
-
Disconnect electrical connection and unclip from retainer -arrow-.