Jetta Sedan L4-2.0L (BBW) (2005)
/Page-694005.png)
4- Circlip
5- Connecting rod
^
With split bearing cap
^
Only replace as a set
^
Mark relation to cylinder -B-
^
Marking -A- faces belt pulley end
6- Bearing shell
^
Observe installation position
^
Do not interchange used bearing shells
^
Check seated securely
^
Axial clearance, New: 0.10 ... 0.35 mm; Wear limit: 0.4 mm
^
Check radial clearance with Plastigage(R): New: 0.01 ... 0.05 mm; Wear limit: 0.09 mm (Do not rotate crankshaft when checking radial
clearance)
