Jetta Sedan L4-2.0L (BBW) (2005)
/Page-2046002.png)
-
Remove noise insulation.
-
Loosen belt pulley hex socket head bolt.
Counter-hold with a hex key if necessary.
-
Turn belt tensioner in direction of - arrow - to loosen ribbed belt.
-
Identify direction of rotation of ribbed belt.
-
Remove ribbed belt.
-
Remove belt pulley hex. socket head bolt.
-
Clamp off intake hose with hose clamps 3094.
-
Open spring clamp - 3 - and pull off intake hose
Use assembly tool for spring-type clip pliers VAS 5024 for this.
-
Remove banjo bolt - 4 -.
