Jetta Sedan L4-2.0L (BBW) (2005)
/Page-1421002.png)
-
Pull off connector -4-.
-
Remove sleeve -5- upward.
-
Release selector lever housing cover at retaining lugs -6- (Qty. 4) by hand and lift off.
-
Carefully pry off four corners of frame -7- and remove.
-
Slide 0.8 mm feeler gauge between locking lever and selector lever roller.
-
Pull locking cable outer sleeve lightly forward in direction of travel (arrow -1-) and push red clip downward until it engages (arrow -2-).
-
Push sliding sleeve over clip.
-
Check operation of ignition key withdrawal lock.
