Jetta Sedan L4-2.0L (BBW) (2005)
Torque Converter: Service and Repair
Sleeve Bearing, Removing From Turbine Shaft
Sleeve bearing, removing from turbine shaft, 01M, 4 Spd. A/T
Place transmission in its installed position on transmission oil pan.
-
Remove torque converter.
-
Position holes -A- of turbine shaft in horizontal position.
-
Protect transmission by carefully taping around turbine shaft and over holes.
-
Saw through sleeve bearing using a saw blade. When doing this, do not saw at thrust point of sleeve bearing (arrow).
Note: Make sure that no filings enter the transmission.