Jetta Sedan L4-2.0L (BBW) (2005)
-
Pry clip -B- for line/hose assembly out of master cylinder (direction of arrow).
-
Pull line/hose assembly -C- out of master cylinder and seal.
-
Remove driver's side lower cover
Remove complete clutch pedal mounting bracket as follows:
-
Remove connecting plate -A- first (arrows -1-).
-
Remove securing nuts (arrows -2-) for mounting bracket -B-.
-
Take off mounting bracket.
Separate master cylinder operating rod from clutch pedal as follows:
-
Insert release tool 3309 in clutch pedal cut-outs (arrow -A-). Inscription top/oben (-B-) points away from clutch pedal.
-
With pliers 10-208A positioned in recesses (arrow -C-), press release tool together.