Jetta Sedan L5-2.5L (BGP) (2005)
-
Insert drain hose - 3 - through opening in fuel tank lid unit - 2 - and pull drain hose through until it stops.
-
Guide drain hose into side panel.
-
Slide fuel tank lid unit - 2 - with hinge side first into side panel.
-
Then swivel fuel tank lid unit completely onto side panel.
Make sure that catches of fuel tank lid unit - 2 - at top and bottom engage correctly in the side panel.
-
Pull rubber piece of fuel tank lid unit over filler neck and tighten bolt - 4 -.
Tightening specification for bolt - 4 -: 1.5 Nm
-
Check correct function of unlocking components.
Fuel Tank Lid Unlock Motor
Removing
-
Remove right side luggage compartment trim.
-
Disconnect harness connector - 8 - from Fuel Tank Lid Unlock Motor (V155) - 9 -.
-
Loosen bolts - 10 -.
-
Pull out Fuel Tank Lid Unlock Motor (V155) - 9 - together with release rod - 7 - from seal - 6 - and assembly piece - 5 -.