Jetta Sedan L5-2.5L (BGP) (2005)
Trunk / Liftgate Lock: Service and Repair
Lid Lock, Removing And Installing
Removing
-
Remove lock cover.
-
Remove rear lid trim.
-
Remove cover cap - 1 -.
-
Disconnect harness connector - 2 - from lid lock - 5 -.
-
Disengage Bowden cable - 3 -.
-
Remove hex nuts - 4 - and remove lid lock - 5 -.
-
If lid lock - 5 - is to be replaced, disengage Bowden cable - 6 -.
Installing
Installation is performed in the reverse order of removal.
Tightening torque for hex nuts: 8 Nm
Before the rear lid is closed, a function test of the unlocking components must be performed.