Volkswagen Workshop Service and Repair Manuals

‹› M14 x 1.5.

‹› Self locking.

‹› Always replace after removal.

‹› Always tighten threaded connections in curb weight position. Refer to --> [ Wheel Bearing Housing, Lifting to Curb Weight Position ] See:

Steering and Suspension/Suspension/Service and Repair/Rear Suspension/Wheel Bearing Housing, Lifting to Curb Weight Position.

15

Washer

16

Nut, 130 Nm + 90° additional turn

‹› M14 x 1.5.

‹› Self locking.

‹› Always replace after removal.

‹› Always tighten threaded connections in curb weight position. Refer to --> [ Wheel Bearing Housing, Lifting to Curb Weight Position ] See:

Steering and Suspension/Suspension/Service and Repair/Rear Suspension/Wheel Bearing Housing, Lifting to Curb Weight Position.

17

Wheel bearing housing

‹› Removing and installing, refer to --> [ Wheel Bearing Housing ] See: Steering and Suspension/Suspension/Rear Knuckle/Service and

Repair/Wheel Bearing Housing. 

18

Washer

19

Bolt

‹› Always replace after removal.

‹› Always tighten threaded connections in curb weight position. Refer to --> [ Wheel Bearing Housing, Lifting to Curb Weight Position ] See:

Steering and Suspension/Suspension/Service and Repair/Rear Suspension/Wheel Bearing Housing, Lifting to Curb Weight Position.

20

Tie rod

‹› Closed in direction of travel.

21

Bolt

‹› Always replace after removal.

22

Nut, 90 Nm + 90° additional turn

‹› M12 x 1.5.

‹› Self locking.

‹› Always replace after removal.

‹› Always tighten threaded connections in curb weight position. Refer to --> [ Wheel Bearing Housing, Lifting to Curb Weight Position ] See:

Steering and Suspension/Suspension/Service and Repair/Rear Suspension/Wheel Bearing Housing, Lifting to Curb Weight Position.