Jetta Sedan L5-2.5L (BGP) (2005)
Headliner: Service and Repair
Roof Insulation/Reinforcements, Wagon
Roof Trim
Roof Insulation/Reinforcements, Wagon
Removing
-
Remove headliner. Refer to --> [ Molded Headliner, Wagon ] See: Molded Headliner, Wagon.
-
Cut the roof insulation/reinforcements - 1 - into strips approximately 6 cm wide - 2 - with a carpet knife, moving in the direction of travel.
-
Remove the strips - 2 - from the roof.
-
Cut back the adhesive residue - 3 - with an Electric Cutter (V.A.G 1561 A) and Cutting Blade (V.A.G 1561/20) - 4 -.
‹› If paint structure was damaged while removing roof insulation/reinforcements, paint damage must be repaired.
Installing
‹› Processing instructions of adhesive must be observed when installing roof insulation/reinforcements.
-
Using a Cartridge Gun (V.A.G 1628), apply the 1K Assembly Adhesive (D 190 MKD A3) - 2 - to the roof insulation/reinforcements - 1 -.
-
Dimension - a - = 61 mm
-
Dimension - b - = 25 mm
-
Dimension - c - = 34.5 mm