Jetta Sedan L5-2.5L (BGP) (2005)
Trunk / Liftgate Weatherstrip: Service and Repair
Rear Lid, Sedan
Rear Lid Seal
‹› During removal of the seal, sealant is distributed on interior side of seal and flanks are bent up easily. If the seal is re-installed, the sealing
performance and proper seating are no longer guaranteed.
‹› For this reason, every completely removed seal must be replaced with a "hammer-stroke seal".
‹› For partially removed seals, seal flanks must be pressed together before installation.
Removing
-
Pull off rear lid seal - 1 - from body flange.
Installing
-
Align rear lid seal - 1 - with vulcanized point - arrow - to center of left tail lamp.