Jetta Sedan L5-2.5L (BGP) (2005)
‹› The 4 cover bolts must NOT be loosened under any circumstances!
-
Remove the old gasket.
Installing
-
Place a new gasket - 2 - onto the vacuum pump.
-
Place the vacuum pump coupling plate - 3 - so that it engages into the symmetrical groove of the double wheel sprocket - 1 - - arrows - when
installing the vacuum pump.
-
Tighten the bolts.
The rest of the installation follows the reverse of the removal procedures.
-
Install the battery..
Tightening Specifications