Jetta Sedan L5-2.5L (BGP) (2005)
/Page-940002.png)
CAUTION!
Hot steam may escape when opening the expansion tank cap. Wear protective goggles and protective clothing to prevent damage to eyes
and scalding. Cover the cap with a cloth and open very carefully.
-
Drain the cooling system. Refer to --> [ Draining and Filling ] See: Cooling System/Service and Repair/Cooling System, Draining and Filling.
-
Remove the air guide bolts - arrows - from the lock carrier.
-
Remove the intake hose - 4 -. To do so, disconnect the air hoses - 1 - and - 2 - (compress securing ring) and remove the spring clamp - 3 -.
-
Remove the front and rear sections of the right front wheel housing liner.
-
Remove the generator and coolant pump ribbed belt. Refer to --> [ Ribbed Belt ] See: Drive Belts, Mounts, Brackets and Accessories/Drive
Belt/Service and Repair/Ribbed Belt.
-
Remove the 4 nuts - 2 - and bolts - 3 -.
