Jetta Sedan L5-2.5L (BGP) (2005)
-
Adhere upper sealing strips from above onto 6th lamella row of condenser before installing.
-
Adhere lower sealing strips from below onto 1st lamella row of condenser before installing.
-
Adhere side sealing strips from below onto condenser collector from the 1st lamella row before installing.
5. Spacer
NOTE: Only on models with gasoline engine.
6. Bolt
-
5 Nm
7. Radiator
8. Screws
-
4x
-
5 Nm
9. Fluid reservoir with dryer cartridge