Jetta Sedan L5-2.5L (BGP) (2005)
/Page-3625004.png)
-
Place Headlamp Beam Adjusting Motor - 1 - in headlamp in position shown in illustration.
-
Raise low beam reflector slightly and pivot positioning motor ball head - 1 - so that it can slide into - direction of arrow - ball head mount - 2 -.
-
Install both Headlamp Beam Adjusting Motor bolts.
CAUTION!
When installing cap, ensure proper seating. It is destroyed by ingress of water into headlamp.
-
Install HID Lamp Igniter Unit (N195) and bolt on cover cap.
-
Seal broken out assembly opening - 1 - with a plug ordered separately.
