Jetta Sedan L5-2.5L (BGP) (2005)
-
Locking pliers
NOTE: Before removing the Engine Control Module (ECM), obtain the control module identification as well as the coding of the control module
Removing
-
Switch off ignition.
-
Remove wiper arms and plenum chamber cover
-
Remove plenum chamber bulkhead
-
Cut heads of shear bolts so that two parallel surfaces remain - arrows -.
-
Remove bolts with locking pliers.
-
Insert screwdriver - A - between protective housing and retaining plate - arrow -.
-
Use screwdriver - A - to pry protective housing upward, and then pull it sideways off of retaining plate - arrow -.