Jetta Sedan L5-2.5L (BGP) (2005)
Checking Pump operation
-
Connect a Jumper wire from the Secondary Air Injection (AIR) Pump Motor (-V101-) terminal 2 to Battery (A) (+).
-
Connect a second Jumper wire from the Secondary Air Injection (AIR) Pump Motor (-V101-) terminal 1 to Ground (GND).
-
Switch the ignition on.
-
Using a Multimeter, check the Secondary Air Injection (AIR) Pump Motor (-V101-) electrical harness connector terminals 1 to 2 for voltage.
-
The Secondary Air Injection (AIR) Pump Motor (-V101-) should run.