Jetta Sedan L5-2.5L (BGP) (2005)
-
Fuel filter with attachments
16. Vacuum line
-
From Leak Detection Pump (LDP) V144 to intake manifold
-
Clipped in at fuel tank
-
Ensure seated tightly
17. Vent line
-
From EVAP canister to Evaporative Emission (EVAP) canister purge regulator valve N80
-
Clipped in at fuel tank
-
Ensure seated tightly
18. Oil seal
-
Replace
-
To install, place into opening of fuel tank dry
-
Only coat inner part with fuel when installing fuel delivery unit.
19. Fuel pump
-
Check fuel pump
-
Note installed position in fuel tank
-
With Fuel level sensor G
-
Fuel level sensor G, removing and installing
-
Clean strainer if soiled
20. Locking ring, 110 Nm
-
Ensure seated tightly
-
Use wrench 3087 to remove and install
21. Return line
-
Blue
-
Clipped to side of fuel tank
-
Ensure seated tightly
22. Cap
-
BGP: Threaded connection
-
BGQ: Bayonet connection
-
Replace gaskets if damaged
23. Tank flap unit
-
With rubber cup
-
Removing and installing.
24. To EVAP canister
25. Supply line
-
Black
-
Clipped to side of fuel tank
-
Ensure seated tightly
Installation position of fuel delivery unit
Tab - 2 - on fuel delivery unit must lie between tabs - 1 - and - 3 -.
NOTE:
-
Arrow - points in direction of travel.
-
The fuel delivery unit can only be installed in this position.