Jetta Sedan L5-2.5L (BGP) (2005)
Body Control Module: Programming and Relearning
Comfort System Central Control Module J393, Adaptation
Comfort System Central Control Module J393, adapting
The following functions can be adapted (depending on vehicle equipment):
-
Activating and deactivating "single door opening"
-
Activating and deactivating "automatic locking at >15 Km/h"
-
Activating and deactivating "automatic unlocking when removing ignition key"
-
Activating and deactivating "country setting for intelligent alarm horn"
-
Activating and deactivating "battery monitoring (sounder)"
-
Activating and deactivating "comfort operation via radio-frequency remote control"
-
Activating and deactivating "anti-theft warning system - alarm delay when opening driver door"
-
Connect Vehicle Diagnosis, Testing and Information System VAS 5051/5052
-
Select operating mode "Guided Fault Finding"
-
Enter information as prompted and press ">" to confirm.
After the DTC memory of all control modules has been checked:
-
Use "Go to" button to select "Function / Component Selection"
-
Select "Body"
-
Select "Repair work int/ext"
-
Select "01 - Self-diagnosis"
-
Select "46 - Central module comfort system"
-
Select "Functions"
-
Select "Adaptation"
-
Press ">" to confirm.
-
Follow tester prompts
Comfort System Central Control Module J393 Anti-theft alarm system, checking alarm sources
-
Connect Vehicle Diagnosis, Testing and Information System VAS 5051/5052
-
Select operating mode "Guided Fault Finding"
-
Enter information as prompted and press ">" to confirm.
After the DTC memory of all control modules has been checked:
-
Use "Go to" button to select "Function / Component Selection"
-
Select "Body"
-
Select "Repair work int/ext"
-
Select "01 - Self-diagnosis"
-
Select "46 - Central module comfort system"
-
Select "Functions"
-
Select "Comfort System Central Control Module J393, checking alarm sources of anti-theft alarm system"
-
Press ">" to confirm.
-
Follow tester prompts
Programming Comfort System Central Control Module J393
Comfort System Central Control Module J393, coding
-
Connect Vehicle Diagnosis, Testing and Information System VAS 5051/5052
-
Connect Vehicle Diagnosis, Testing and Information System VAS 5051/5052
-
Select operating mode "Guided Fault Finding"
-
Enter information as prompted and press ">" to confirm.
After the DTC memory of all control modules has been checked:
-
Use "Go to" button to select "Function / Component Selection"
-
Select "Body"
-
Select "Repair work int/ext"
-
Select "01 - Self-diagnosis"
-
Select "46 - Central module comfort system"
-
Select "Functions"
-
Select "Coding"
-
Press ">" to confirm.
-
Follow tester prompts
Comfort System Central Control Module, Adapting