Jetta Sedan L5-2.5L (BGP) (2005)
Installing
-
Connect rear connector to Motronic Engine Control Module (ECM) J220 and lock it into place.
-
Push Motronic Engine Control Module (ECM) J220 onto retaining plate.
-
Connect front connector to Motronic Engine Control Module (ECM) J220 and lock it into place.
-
Check whether the new control module identification matches the old control module identification.
-
Perform function "Replacing control module" using Vehicle diagnosis and service information system VAS 5052.
-
Push protective housing - 2 - onto retaining plate.
-
Screw in shear bolts - 1 - uniformly until the bolt heads begin to shear.
-
Install plenum chamber bulkhead, plenum chamber cover and windshield wiper arms.
-
Generate readiness code.