Jetta Sedan L5-2.5L (BGP) (2005)
-
Now connect the forward electrical connector - 1 - to the ECM and engage it.
-
Slide the protective housing onto the retaining plate.
-
Tighten the shear bolts - 1 - uniformly until the bolt heads shear off.
-
Install the plenum chamber bulkhead.
-
Install the wiper arms and plenum chamber cover.
Engine Control Module, without Anti-Theft Protection
Engine Control Module, without Anti-Theft Protection
‹› If it is desired to replace the Engine Control Module (ECM), connect the (VAS 5051) and perform the guided function " Replace control module".
Removing
-
Switch off the ignition.
-
Remove the wiper arms and plenum chamber cover.
-
Remove the plenum chamber bulkhead.
-
Disengage the forward electrical connector - 1 - from the ECM and disconnect it.