Jetta Sedan L5-2.5L (BGP) (2005)
Select diagnostic function:
-
Press "02 - Check DTC memory" on display.
-
If no DTC is stored in Engine Control Module (ECM), "0 malfunctions detected" appears on display.
-
If DTCs are stored in Engine Control Module (ECM), they are listed in sequence on display.
-
Press <- -button.
-
Press "05 - Erase DTC memory" on display.
-
Press the "06-End output" function.
NOTE: If DTC memory was erased, readiness code must be generated again Vehicle Diagnosis, Testing and Information System VAS 5051
"Guided Functions".