Jetta Sedan L5-2.5L (BGP) (2005)
If the value jumps to approx. 140.0 °C
-
End of diagnosis and switch the ignition off.
-
Replace the Engine Coolant Temperature (ECT) Sensor (G62)
If indication remains at approx. -40.0 °C:
°Testing if display approx. 140.0 C
-
Disconnect the Engine Coolant Temperature (ECT) Sensor (G62) electrical harness connector - arrow -.
If indication jumps to approx. -40.0 °C:
-
End of diagnosis and switch ignition off.
-
Replace the Engine Coolant Temperature (ECT) Sensor (G62)
If indication remains at approx. 140.0 °C:
Checking wiring
If the manufacturers test box is being used. Perform the following step.
-
Install the Adapter Cable (121-pin) (VAG1598/31)24 Removal and Installation.
If the manufacturers test box is not being used. Perform the following step.
-
Remove the Motronic Engine Control Module (ECM) (J220). Refer to --> [ Engine Control Module, Replacing ] See: Powertrain