Jetta Sedan L5-2.5L (BGP) (2005)
Steering Angle Sensor: Procedures
(FWD)
Basic setting of Steering Angle Sensor G85 must be checked after this assembly work:
^
If the Steering Angle Sensor G85 was removed or replaced;
^
After removing or replacing steering column;
^
After removing or replacing steering lock housing with steering column switches;
^
After removing or replacing steering gear;
^
If the steering wheel was offset.
Checking Steering Angle Sensor Basic Setting After the Following Work
Checking Steering Angle Sensor Basic Setting After the Following Work
‹› If the steering angle sensor was removed or replaced;
‹› After removing or replacing the steering column;
‹› After removing or replacing the steering lock housing with steering column switches;
‹› After removing or replacing the steering gear;
‹› If the steering wheel was offset.
Steering Angle Sensor Basic Setting
Steering Angle Sensor Basic Setting
If the steering wheel is offset, the basic setting of the steering angle sensor must be checked! Perform --> basic setting in Guided Fault
Finding using the Vehicle Diagnosis, Testing and Information System (VAS 5051B).
For this, use Go to to access "Functions/Component selection".