Jetta Sedan L5-2.5L (BGP) (2005)
/Page-2446003.png)
-
Tighten the bolt - arrow - for the tie rod - 3 -.
-
Install the coupling rod - 2 - to the stabilizer bar and tighten the nut - 1 -.
-
Install the coil spring. Refer to --> [ Coil Spring ] See: Suspension Spring ( Coil / Leaf )/Service and Repair/Coil Spring.
-
Install the wheel and tighten. Refer to --> [ Wheel Bolt Tightening Specification ] .
-
Perform a vehicle alignment. Refer to --> [ Wheel Alignment ] See: Alignment/Service and Repair/Wheel Alignment.
Tightening Specifications
