Volkswagen Workshop Service and Repair Manuals

1

Nut, 65 Nm

‹› When tightening, counter hold on hex head of joint bolt.

‹› Self locking.

‹› Always replace after removal.

2

Coupling rod

‹› Linking stabilizer bar to strut.

3

Bracket

‹› Locating, refer to--> [ Subframe Locating ] See: Cross-Member/Front Cross-Member/Service and Repair/Procedures/Subframe Locating.

‹› If a bracket is replaced, the vehicle must be aligned. Refer to --> [ Wheel Alignment ] See: Alignment/Service and Repair/Wheel Alignment.

4

Mounting bracket

‹› Locating, refer to --> [ Securing the Mounting Bracket ] See: Cross-Member/Front Cross-Member/Service and Repair/Procedures/Subframe

Locating

‹› With bonded rubber bushings.

5

Bolt, 50 Nm + 90° additional turn

‹› Always replace after removal.

6

Bolt, 70 Nm + 90° additional turn