Jetta Sedan L5-2.5L (BGP) (2005)
Stabilizer Bar: Service and Repair
Rear Suspension
Stabilizer Bar
Stabilizer Bar
Special tools, testers and auxiliary items required
‹› Torque wrench 5-50 Nm (VAG 1331)
Removing
‹› The following work steps are described for the left side of the vehicle. These work steps also apply simultaneously for right side of vehicle.
-
Remove the nut - 1 - and remove the coupling rod - 2 - from the stabilizer bar.
‹› Do not loosen the bolt - arrow - for the tie rod - 3 -.
-
Remove the stabilizer bar bracket bolts - arrows -.
-
Remove the stabilizer bar.
Installing
-
Install the stabilizer bar in the vehicle.
-
Install and tighten the stabilizer bar bracket bolts - arrows - evenly.