Jetta Sedan L5-2.5L (BGP) (2005)
1
Stabilizer bar
‹› Note different suspension versions, refer to --> [ Vehicle Data Label ] See: Alignment/Service and Repair/Vehicle Data Label.
‹› Removing and installing, refer to --> [ Stabilizer Bar ] See: Stabilizer Bar.
2
Bushing
‹› Always replace the bushings on both sides of the vehicle.
3
Bracket
4
Bolt, 25 Nm + 45° additional turn
‹› Tighten uniformly.
‹› Always replace after removal.
‹› Always tighten threaded connections in curb weight position. Refer to --> [ Wheel Bearing Housing, Lifting to Curb Weight Position ] See:
Service and Repair/Rear Suspension/Wheel Bearing Housing, Lifting to Curb Weight Position.
5
Wheel bearing housing
6
Nut, 45 Nm
‹› Self locking.
‹› Always replace after removal.
7
Bolt
‹› Self locking.
‹› Always replace after removal.
8
Coupling rod
‹› Connects the stabilizer bar to the trailing arm/wheel bearing housing.