Jetta Sedan L5-2.5L (BGP) (2005)
Shift Cable: Removal and Replacement
Selector Lever Cable
‹› Following installation, cable must be checked for ease of movement and be adjusted.
Removing
-
Move selector lever to position "S" position.
-
Lever cable - 1 - off lever - 3 - using an open wrench - 2 -.
-
Press catches together - arrows - and remove cable from cable support bracket.
-
Raise vehicle.
To remove cable and/or selector mechanism, heat shield and, if necessary, parts of exhaust system must now be removed (Gasoline engines)
-
Remove heat shield.
-
Remove - selector housing - beneath selector lever.