Jetta Sedan L5-2.5L (BGP) (2005)
1 - Dual-mass flywheel
^
Make sure centering pins fit securely
^
Contact surface for clutch lining must be free of grooves, oil and grease
2 - Clutch plate
^
Only replace together with pressure plate
3 - Pressure plate
^
Only replace together with clutch plate
4 - Bolt M7, 20 Nm
^
Loosen and tighten in small steps and in diagonal sequence.
Clutch (Sachs), Removing and Installing
Clutch (Sachs), removing and installing 04A, 5 Speed M/T
Removing
-
Remove transmission.
-
Insert flywheel retainer 3067 to loosen bolts.
-
Loosen bolts in small steps and in diagonal sequence.
^
When loosening, the stop - 2 - with stud - 1 - must also loosen.