Jetta Sedan L5-2.5L (BGP) (2005)
Shift Cable: Service and Repair
Operating Cables Assembly Overview
‹› Lubricate bearing areas and slide surfaces with grease (G 000 450 02).
1
Shift cable
‹› Connect with cable retainer --> [ 11 Cable retainer ]
‹› Installation position --> [ Shift Mechanism Installation Position ] See: Shifter M/T/Service and Repair/Procedures
‹› From 11.06 changed fastener on shift lever inside shift mechanism --> [ 8 Shift cable ] See: Shifter M/T/Service and Repair/Removal and
Replacement/Shift Lever and Shift Housing from 10.06, Servicing
2
Selector cable
‹› Connect with cable retainer --> [ 10 Cable retainer ]
‹› Installation position --> [ Shift Mechanism Installation Position ] See: Shifter M/T/Service and Repair/Procedures
‹› From 11.06 changed fastener on selector bracket inside shift mechanism --> [ 6 Selector cable ] See: Shifter M/T/Service and Repair/Removal
and Replacement/Shift Lever and Shift Housing from 10.06, Servicing
3
Lock washer
‹› Always replace
‹› Discontinued on shift mechanisms from 11.06 --> [ Shift Lever and Shift Housing from 10.06, Servicing ] See: Shifter M/T/Service and
Repair/Removal and Replacement/Shift Lever and Shift Housing from 10.06, Servicing