Jetta Sedan L5-2.5L (BGP) (2005)
-
Pull securing mechanism forward as far as the stop in direction of - arrow 1 - and then unlock to left in direction of - arrow 2 -.
-
Then press relay lever forward (direction of - arrow 3 -).
-
Press tab - arrow 1 - (previous illustration) down as far as the stop and remove relay lever together with the cable retainer.
‹› The cable retainer may only be removed with the relay lever removed --> [ Pry selector cable retainer out of plastic relay
lever. ]
‹› To install, grease the mounting points and contact surfaces with using grease (G 000 450 02).
-
Press cable retainer on relay lever --> [ Press on cable retainer ]
-
Insert relay lever together with cable retainer.
‹› The tab - arrow 1 - secures relay lever (previous illustration).
‹› The cable retainer must be behind tab - arrow 2 - (previous illustration).
Pry selector cable retainer out of plastic relay lever.