Jetta Sedan L5-2.5L (BGP) (2005)
Wiper Blade: Service and Repair
Windshield Joint-Free Wiper Blades
Windshield Joint-Free Wiper Blades
‹› Right and left wiper blades may not be interchanged during installation.
‹› Joint-free wiper blades are very flexible. Grasp wiper blades only in area of wiper blade mount to lift them off the windshield.
‹› To remove wiper blades, wiper arms must be driven into "service/winter position". The "service/winter position" is activated by operating
windshield wiper lever in "one-touch wiping" position within 10 seconds after switching off ignition.
Removing
-
Move wiper arms into "service/winter position" by moving windshield wiper lever into "one-touch wiping" position within 10 seconds after
switching off ignition.
-
Fold up wiper arm.
-
Turn wiper blade - 1 - on wiper arm until it reaches stop - arrow A -.
-
Pull off wiper blade - 1 - from wiper arm axle - arrow B -.
Installing
-
Slide wiper blade onto axle of wiper arm.
-
Turn wiper blade on wiper arm axle until it reaches stop.
-
Carefully fold wiper arm back onto windshield.