Jetta Sedan L5-2.5L (CBTA) (2009)
Antitheft Motion Sensor: Service and Repair
Anti-Theft Alarm System Ultrasound Sensor, Left Rear Side of Roof
Anti-Theft Alarm System Ultrasound Sensor, Left Rear Side of Roof
From model year 2007, the Vehicle Inclination Sensor (G384) and Anti-Theft Alarm System Ultrasound Sensor (G209) are installed in one unit on
the left rear side of the roof.
Special tools, testers and auxiliary items required
‹› Trim removal wedge (VAS 3409)
CAUTION!
‹› Turn off the ignition and all electrical consumers.
‹› Remove ignition key.
‹› When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool ( (
VAS 3409), screwdriver) will be positioned, using commercially available adhesive tape.
Removing
-
Using the (VAS 3409), unclip the Anti-Theft Alarm System Ultrasound Sensor - arrow -.
‹› The clip - 1 - that holds the Anti-Theft Alarm System Ultrasound Sensor has three prongs. To loosen the Anti-Theft Alarm System Ultrasound
Sensor, the three prongs must be pressed. Otherwise, the sensor will not come out.
-
Remove the Anti-Theft Alarm System Ultrasound Sensor.