Jetta Sedan L5-2.5L (CBTA) (2009)
Rear Bumper Cover / Fascia: Service and Repair
Rear Bumper Cover, Sedan
Rear Bumper Cover, Sedan
NOTE: Due to model variations, small deviations must be considered during removal and installation.
Removing
-
Remove taillamp assembly in side panel on left and right.
-
Remove screws - 7 - in area of left and right wheelhousing liner.
-
Pry out left and right expanding rivet - 3 - using a screwdriver.
-
Remove bolts - 4 - and - 5 - from below.
-
Remove bolts - 2 - from above.
-
Remove bolt - 1 - on left and right of luggage compartment out (remove side luggage compartment cover).
A second technician is required for the rest of the removal procedure.
-
With a second mechanic, pull bumper cover - 6 - parallel out of guide profiles.
-
Disconnect harness connectors of installed electrical components.