Jetta Sedan L5-2.5L (CBTA) (2009)
-
Swivel door handle - 1 - into door.
-
Pull clip - 2 - into plate cutout and engage clip into door handle - 1 - - arrow -.
‹› During installation, door handle - 1 - must be pressed onto door panel.
‹› Clip - 2 - must engage into door handle - 1 - with a very audibly click.
-
Install housing. Refer to --> [ Housing ]. See: Service and Repair/Housing
Then a function test must be performed with door open, since the door cannot be opened if release is not correctly adjustment or clipped in.